SWAMP 10″ 2-way 150W RMS – Passive PA Speaker

SWAMP CA-10 2-way, 150W RMS – 10″ Passive PA Speaker
Designed for general public address purposes including speeches, conferences, parties and artistic / band performances. The 2-way speaker design means that all types of sounds (music, voice, etc) can be heard clearly within the full spectrum of audible sound.

Speaker Stand Mountable
The CA-10 features the standard 35mm hole on the bottom of the speaker, for mounting the box onto any standard speaker stand.

Power from a Power Amplifier / Audio Receiver
Being a ‘passive’ speaker, the CA-10 will require a ‘power amplifier’ to provide the audio signal and the power required to drive the speaker. Power amps are either sold as standalone units, or may be included as part of a mixing desks or audio receiver (home theatre). The CA-10 can be powered by any type of power amplifier, providing the power output of the amp does not exceed 250W (at 8 ohm). We recommend selecting an amplifier outputting between 150W and 200W (at 8 ohm). Feel free to contact us for assistance in selecting a suitable power amp.

Features:

• Powerful General PA Speaker
• Speaker Stand Mountable
• High Density Fibre Board Cabinet

Specifications:

• Impedance: 8 Ohms
• MAX Program: 300W
• RMS Power: 150W
• Tweeter: RMS Power: 25W; MAX Power: 50W
• Woofer: RMS Power: 125W; MAX Power: 250W
• Dimensions: (L x W x H) 300 x 280 x 500
• 25mm Ti.Diap. Driver
• Sensitivity: 96dB/W/m
• 10″ Woofer, 40oz Magnet, 50mm V.C.
• Frequency range: 55Hz-20kHz
• Weight: Approx. 11.9kg
• Rear Panel Dimensions: Approximately 100mm x 125mm